Compex energy Manual Del Usuario página 152

Ocultar thumbs Ver también para energy:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Where never to apply the
electrodes
In the vicinity of the head
Counter-laterally, i.e. do not use two
poles connected to the same channel
on opposite sides of the body.
On or near skin lesions of any kind
(wounds, swelling, burns, irritation,
eczema, etc.).
Precautions when using the
m-4 system
To access the Compex's m technology
functions, it is essential to connect the
m-4 cable before switching on
the device.
Avoid connecting the m-4 cable
when the Compex is switched on.
Do not disconnect the m-4
cable while the sensor is being used.
To work correctly, the m-4
system must not be blocked or
subjected to pressure.
Precautions when using the
electrodes
Only use electrodes supplied by
Compex. Other electrodes may have
electrical properties that are
unsuitable for the Compex stimulator.
Always turn off the stimulator before
moving or removing any electrodes
during a session.
Do not place the electrodes in
Do not apply solvents of any kind to
the electrodes.
For best results, wash and clean the
skin of any oil and dry it before
attaching the electrodes.
Attach the electrodes in such a way
that their entire surface is in contact
with the skin.
For obvious reasons of hygiene, each
user must have his/her own electrode
set. Do not use the same electrodes
on different people.
150
Never use a set of adhesive electrodes
for more than 15 sessions as their
bonding power deteriorates over time
and optimal contact is very important
for both user comfort and efficacy.
Some people with very sensitive skin
may experience redness under the
electrodes after a session. Generally,
this redness is completely harmless
and disappears after 10 to 20 minutes.
Never start another stimulation
session in the same area, however, if
the redness is still visible.
water.

Publicidad

Tabla de contenido
loading

Productos relacionados para Compex energy

Tabla de contenido