Spanset DSL2 Manual Del Usuario página 9

Product Lifespan
It is mandatory by European Law
that all PPE must be supplied with
comprehensive User Instructions which
detail the lifespan of the product, and
the inspection requirements.
Current European standards state at
least every 12 months the equipment
must be examined by a competent
person authorised by SpanSet and the
results recorded.
The actual frequency of the periodic
inspection is the responsibility of the
competent person in charge of the
maintenance of the product. Aggressive
or arduous conditions and constant use
will potentially reduce the working life
of the product and so a more frequent
inspection regime will be required to
effectively monitor this.
In accordance with BS8437:2005
SpanSet recommend that PPE for Work
at Height is thoroughly examined by a
competent person:
– When issued into service for the
fi rst time
– Periodically at intervals not
exceeding 6 months
– Interim inspections where required
DSL2 0216-1.0
SpanSet recommend that Pre-Use
checks are carried out by the user
before each and every use. Any
concerns about the condition of
equipment must result in the item
undergoing a thorough interim
inspection.
The equipment should only be used if it
is found to be in a fi t condition.
In addition SpanSet give this product a
period of obsolescence of 10 years from
date of manufacture, even if
never used.
The DSL2 should be withdrawn from
service if they meet any one of the
following criteria:
1) Failure of a thorough examination
2) Subjected to or Used to arrest a fall
3) The period of obsolescence (shelf-
life) has been reached
Compatibility and use of PPE is the
responsibility of the user.
DSL2
Product Labelling
Instructions For Use
SpanSet can supply other items of
equipment that are compatible with
this product.
These include: EN361 fall-arrest
harnesses, a variety of EN362
connectors, work positioning belts, and
adjustable safety lines. SpanSet also
produces/supplies a full range of fall
arrest and access equipment.
SpanSet offers training either on site or
at our own premises, in all aspects of
height safety. Courses are accredited
under our registration to ISO 9001,
and certifi cates are issued on
successful completion.
For the safety of all users SpanSet
recommends you take advantage of this
training service, please contact us for
further details.
Manufactured By:
SpanSet Uk Ltd.,
Telford Way, Middlewich,
Cheshire, CW10 0HX
Tel: +44(0)1606 737494
Fax: +44 (0)1606 737502
www.spanset.co.uk
9