Cable Exit; Assembly - FAAC Night ONE Day Manual De Instrucciones

7.2

Cable exit

Only for lay-outs 10 and 11:
• route the electric cable through the tube in PVC (see image Fig.19).
IMPORTANT: the electric cable must not be in contact with any mobile part.
IMPORTANT: You must hold the cable as tight as possible. .
7.3

Assembly

1) Fit the transmission on the right, making sure that the reinforcement is correctly fitted.
2) Put the frame in position
A. Motor frame.
B. Fast transmission (grey).
To facilitate the operation, rotate
the transmission hexagon with a
No. 0 spanner.
Exterior
A
Exterior

Inside
B
Fig. 19
Fig. 20