FAAC Night ONE Day Manual De Instrucciones página 48

8.2 Cable exit
Only for lay-outs 14 and 15:
• route the electric cable through the tube in PVC (see image Fig.25).
IMPORTANT: the electric cable must not be in contact with any mobile part.
IMPORTANT: You must hold the cable as tight as possible.
8.3 Assembly
1) Fit the transmission on the left, making sure that the reinforcement is correctly fitted.
2) Put the frame in position.
A. Motor frame.
B. Slow transmission (yellow).
To facilitate the operation, rotate
the transmission hexagon with a
No. 0 spanner.
Inside
A

Fig. 25
Exterior
B
Exterior
Fig. 26