Securing Holes; Securing The Frame - FAAC Night ONE Day Manual De Instrucciones

7.4

Securing holes

1) Assemble the pieces and position them under the lintel or as a support (the figure shows installation on the lintel).
2) Mark the position of the frame holes with an adequate bit.
3) Place the expansion plugs in the holes.
ATTENTION: Quality of securing is essential for a correct
operation of the device.
7.5

Securing the frame

1) With the spirit level, check if the device is horizontal.
2) Add the supplied toothed washers and tighten the tie-rods with a No. 13 spanner.
3) Go to chapter 9
Fig. 21

Fig. 22