PrimeLab 1.0 Multitest Manual De Usuario página 276

Sulphite (HR)
(105)
Continued...
!
Assessment of the measurement value relative to the ideal range defined by you.
Measurement value for this parameter is outside the value range of this method.
Notes
-> (*) Conversion of the measurement result to SO
-> Filter sample if neccessary to obtain a clear solution.
-> Cell, lid and stirring rod need to be cleaned immediately after to prevent
staining.
-> Expect low results if tannin or tannic acid is present.
-> Chlorine
Nitrite
Iron
Sulphide
cause interferences.
243
0 - 300 mg/l
Name on device: 105-Sulfite-HR-tab
Possible messages in the line below the measurement value:
"low! / high! / good!":
"Overrange! / underrange!":
>250 mg/l
>200 mg/l
>20 mg/l
>10 mg/l
(Na SO )
2 3
3
Tablet
243