PrimeLab 1.0 Multitest Manual De Usuario página 56

Boron
(07)
Continued...
!
Assessment of the measurement value relative to the ideal range defined by you.
Measurement value for this parameter is outside the value range of this method.
Note(s)
->
(*) The test result can be converted to the following unit: H BO
-> The pH value of the water sample should be between 6 and 7 pH.
-> The temperature of the water sample has an influence on the measurement
precision and should be at 20°C (+/- 1°C).
23
0 - 2 mg/l
Name on device: 07-Boron-tab
Possible messages in the line below the measurement value:
"low! / high! / good!":
"Overrange! / underrange!":
(B) Tablet
3 3
23