Ebotics Arm Robot Manual Del Usuario página 54

5.4
Turn the D5 piece clockwise until it
reaches the limit.
5.6
Remove the D5 piece
from the rotor axis of
the Servomotor (THE
ROTOR MUST REMAIN
IN THE POSITION IT
HAS JUST ACQUIRED)
Calibrate the Servomotor
Follow the next instructions to calibrate
the Servomotor, this is very important for
the Servomotors to function correctly.
5.7
Insert again the D5 piece in the
position and 90° angle shown in
the image.
5.5
RESULT
ARM ROBOT MANUAL
54