Ebotics Arm Robot Manual Del Usuario página 59

DESCRIPTION
M3/90° JUNCTION
Read before starting
The M3/90° JUNCTION is a 90° junction that uses
M3 screws and nuts. The protruding edges of C5
piece reinforce the 90° joints.
STEP 2: You can hold the nut with
your fingers to make it easier to
insert the screw.
Protruding
edges
Cross
aperture
REQUIRED PIECES
STEP 1: Place the M3 nut in the cross
aperture. This will prevent the nut from
rotating when you insert the screw.
ARM ROBOT MANUAL
C5
M3 M3/10
Nut
X2
X2
STEP 3: Screw tightly.
59