Ebotics Arm Robot Manual Del Usuario página 67

Calibrate the Servomotor
Follow the next instructions to calibrate the
Servomotor, this is important for the Servomotors to
function correctly.
11.3
Turn the Arm Robot clockwise until it
reaches the limit.
11.4
Remove the Arm Robot from the rotor axis of
the Servomotor (THE ROTOR MUST REMAIN
IN THE POSITION IT HAS JUST ACQUIRED)
11.5
Insert again the Arm Robot in a 90° angle
position as shown in the image.
11.6
RESULT
ARM ROBOT MANUAL
67