Tecno-gaz ONYX B 7.0 Manual Tecnico página 107

ENGLISH
PHASE 9: STERILIZATION
When the sterilization's parameters are correct, the autoclave enters into the
sterilization's phase and maintain this condition for the set time (keeping the correct
values).
During this period, all the EV (with the exception of EV5) are off. The electronic control
chokes the power of the heating element.
EV2 EV3 EV4 EV5 EV6 EV7
OFF OFF OFF ON OFF OFF
Phase 9 note : the time indicated in the table refers to the total time (in seconds) of the
sterilization time longer to dry (so the timer starts to decrease at the beginning of the
sterilization phase - see section ).
EXAMPLE REPORT OF PRINT
28