Tecno-gaz ONYX B 7.0 Manual Tecnico página 117

ENGLISH
v
Press to confirm the password and access the technical menu.
▬
Press to restart the procedure.
x
Press to cancel the selections and go back to the setup menu
After having installed the printer (optional accessory),
press the
menu in order to print adhesive traceability labels to be
glued onto the pack before starting the sterilization
00
00
It allows you to activate the supply system with the
osmosis device (optional). When the system is active the
The cycles performed since the last filter replacement are
It is also possible to reset the counter while replacing the
It allows you to display the number of cycles performed
It is also possible to reset the counter while replacing the
Press the arrow to go to the next item
EXTERNAL PRINTER
Label button on the main screen to access the
process.
When the box flashes, press the arrows to
select the number of labels to be printed.
Press the central button to go to the next
When the box flashes, press the arrows to
select the number of months until expiry.
Press the central button again to display
the final selection screen.
Press the arrow to go to the next item
OSMOSIS SYSTEM
filling pump is disabled.
also displayed.
filters.
Press the arrow to go to the next item
BACTERIAL FILTER
since the last filter replacement.
filter.
38
selection