Powerware 5140 Guia De Instalacion página 9

UPS Rear Panel
Powerware 5140 Installation Guide for IBM Applications
®
NOTE Steps 2 through 4 are for EBM installation only. If you do not have optional
EBMs, skip to Step 5 on page 7.
2. Remove the EBM connector cover on the UPS. If a second EBM
is to be used, remove the EBM connector cover on the first EBM
(see Figure 4).
For each EBM connector cover, remove and retain the cover
screw. Discard the cover.
Figure 4. Removing the EBM Connector Covers
05146790 A Uncontrolled Copy
S
Installation
EBM Rear Panel
5