Preparing Your Safe For First Time Use; Installing The Batteries - SentrySafe H060ES Manual Del Usuario

NOTE: Your Residential/Hotel Security Safe is shipped locked.
1
2
NOTE: For proper installation, the notch in the master override key must be at the top edge.
Important:
In an emergency situation, (example: your magnetic strippped card is not available and the
personalized code is unknown), the safe can be opened using the master override key.

Installing the batteries

1
2
3
NOTE: Do not use rechargeable batteries or any other type of non-alkaline battery. Do not mix
old and new batteries. Do not mix alkaline and other battery types.

Preparing Your Safe for First Time Use

Unscrew and remove (by hand) the key lock cap on the front
door of the unit.
Key Lock Cap
Using the override key found in the accessories box, insert the
key and turn it counter clockwise to unlock the safe.
With the door open, remove the battery compartment cover
located on the inside of the door by sliding the cover in the
direction of the arrow.
Install four (4) AA size alkaline batteries. Note the polarity
(+/-) markings in the battery compartment to ensure proper
installation.
Slide the battery compartment cover back into place.
4