SentrySafe H060ES Manual Del Usuario página 7

Operating Safe with Magnetic Stripped Card
To unlock the door
1
2
NOTE: The card must be firmly and evenly swiped from right to left.
3
NOTE: • If the card was swiped incorrectly (from left to right) or at a pace that is too fast or too
slow, the display will show "AGAIN" for two seconds followed by "CARD", indicating
that the card must be swiped again.
• The card used to close the safe must be the same as the card used to open the safe.
Otherwise the display will show "E-CARD" and beep 3 times.
Press "B" on the keypad.
The display will show "– CARD –".
Swipe the card from right to left.
The display will show "OPEN", immediately followed by
"OPENED" indicating that the bolts are retracted into the door.
The spring loaded feature will enable the door to open
automatically.
7