Before Each Use - 3M ReLoad SRL Instrucciones De Usuario

Mode d'emploi • Instrucciones de usuario •
2.0 Instructions for inspection/recertification
WARNING!
Regular and periodic examinations of the SRL are required to ensure the safety of
the user, which is dependent on the continued efficiency and durability of the SRL.
If inspection reveals any defect, inadequate maintenance, or unsafe condition,
immediately remove SRL from service for authorized repairs or disposal.
2.1 Frequency:

2.1.1 Before each use:

The user must carry out a pre-use inspection of the equipment to ensure that it operates correctly before
use.
See Sections 2.2, 2.3 and 2.4 for inspection guidelines.
2.1.2 periodically:
An inspection should be completed by an authorized person other than the user. See Sections 2.2, 2.3 and
2.4.
It is the responsibility of the site safety officer or the user to maintain a record of each periodic
inspection in the inspection log, which can be found at the back of this manual. See Section 6.
User instructions
49