Important Safety Instructions - Snap-On ATC 970S Manual De Instrucciones

IMPORTANT SAFETY INSTRUCTIONS

When using this equipment, basic safety precautions should always be followed,
including the following:
1. Read all instructions.
2. Do not operate equipment with a damaged power cord or if the equipment has been
damaged - until it has been examined by a qualifi ed authorized service technician.
3. If an extension cord is used, a cord with a current rating equal to or more than that
of the machine should be used. Cords rated for less current than the equipment may
overheat. Care should be taken to arrange the cord so that it will not be tripped over
or pulled.
4. Always unplug equipment from electrical outlet when not in use. Never use the cord
to pull the plug from the outlet. Grasp plug and pull to disconnect.
5. To reduce the risk of fi re, do not operate equipment in the vicinity of open contai-
ners of fl ammable liquids (gasoline).
6. Keep hair, loose fi tting clothing, fi ngers and all parts of the body away from moving
parts.
7. Adequate ventilation should be provided when working on operating internal com-
bustion engines.
8. To reduce the risk of electric shock, do not use on wet surfaces or expose to rain.
9. Do not hammer any part of the machine, it isn't designed to be an anvil.
10. Do not allow unauthorized personnel to operate the equipment.
11. Do not disable or bypass the safety systems and follow all the safety procedures.
12. Use only as described in this manual. Use only manufacturer's recommended attachments.
13. Always securely lock the rim before actuating rotation.
14. ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses only have impact resi-
stant lenses, they are NOT safety glasses.
15. The equipment is for indoor use only.
SAVE THESE INSTRUCTIONS
ATC 970 / ATC 980 EN - iii