Set Calendar Override; Amount Of Salt Used Per Regeneration; Estimated Capacity - Aquanex AQU36 Manual Del Propietário

sTeP 4 SET CALENDAR OvERRIDE
Standard Setting
S U M O T U W E T H F R S A D A Y S
S U M O T U W E T H F R S A D A Y S
Time & Day Tin,e & Day
Tin,e & Day
Regen Time & Day
Regen Tin,e & Day
Salt
Regen Tin,e & Day
Saft
Salt An,ount
Capacity
Capacity
Hardness Capacity
Hardness
Hardness
sTeP 5 AMOUNT OF SALT USED PER REGENERATION
Time & Day
Regen Time & Day
Salt
Capacity
Hardness
Standard Setting
S U M O T U W E T H F R S A D A Y S
Time & Day
Tin,e & Day
Regen Time & Day
Regen Tin,e & Day
Salt
Salt An,ount
Capacity
Capacity
Hardness
Hardness
High Capacity Setting
S U M O T U W E T H F R S A D A Y S
Tin,e & Day
Time & Day
Regen Time & Day
Regen Tin,e & Day
Salt
Salt An,ount
Capacity
Capacity
Hardness Hardness
sTeP 6 ESTIMATED CAPACITY
S U M O T U W E T H F R S A D A Y S
Tin,e & Day
Time & Day
Regen Time & Day
Regen Tin,e & Day
Salt
Salt
Capacity
Capacity
Hardness
Hardness
11 • 8/08 AQU36WS
A. "15" days is the default calendar override on 760
control.
B. Days can be adjusted from 1/2 (.5) to 99 days.
C. To change, press SET to make the "15" flash.
D. Use UP and DOWN buttons to change the number of
days desired.
E. Press SET to accept the setting and advance to the
next parameter.
A. Default setting is "S" standard salting.
B. 3 salt settings are available on 760 control.
C. S – Standard Salt – 9 lbs/cubic foot of resin (120 grams/
liter of resin)
D. H – High Salt – 15 lbs/cubic foot of resin (200 grams/liter
of resin)
E. L – Low Salt – 3 lbs/cubic foot of resin (40 grams/liter of
resin)
F. Low Salt is the "Highly Efficient Mode".
G. To change salt setting, press the SET button and use the
UP and DOWN buttons to change to the desired setting.
H. Press SET to accept the setting and advance to the next
parameter.
A. Default setting is set at "25".
B. System capacity is displayed in total kilograins or
kilograms of hardness removed before a regeneration
is necessary.
C. The capacity is displayed for information purposes.
D. To change capacity on the 760 control, press SET
to make the default capacity flash. Use the UP and
DOWN buttons to increment to the desired capacity.
E. Press SET to accept the setting and advance to the
next parameter.