Giropes Baxtran STA Manual De Usuario página 37

TECHNICAL MANUAL
You can use remote controller to operate parameter setting and calibration
I. DISPLAY ILLUSTRATIoN
DiSPLAY iLLUStRAtiOn
Enter zero point calibration.
Enter weight calibration.
Enter parameter setting.
Enter voltage calibration.
First calibration point.
Second calibration point.
Third calibration point.
Exceed high limit.
Exceed low limit.
Waiting.
Weight less than min. capacity.
Accumulated times exceed,
Accumulated weight exceed.
Error in repeat accumulation.
Current accumulation times.
Front four digit of accumulated weight.
Rare four digit of accumulated weight.
Ask if you really want to delete accumulated
weight.
Give up deletion.
Confirm deletion.
Switch. Second function Keys
Input value is too large.
Input value is too small.
No any accumulated content.
Overload warning.
Low battery warning.
The voltage of current battery.
End.
Turn off.
USER'S GUIDE | WEIGHING HOOK | STA
ReMARK
LoAd1<LoAd2<LoAd3
Tare weight can't exceed full capacity.
Tare weight can't be negative.
Can't accumulate the value.
Can't accumulate after 30 times.
Can't accumulate after 99999)
Can't accumulate one weight repeatedly.
For example: the value is 99999kg, the max capacity for
accumulation weight.
You read the indicator: First, display shows H0009 and
immediately L9999.
In case error deletion
When you input tare or weight value.
When you input tare or weight value.
When you check accumulation.
Tare + Net weight exceed full capacity + 9e
Turn off automatically one minute later.
When parameter setting or calibration ready
ES
37