Key Function In Parameter Setting/Calibration; Parameters Setting - Giropes Baxtran STA Manual De Usuario

2. kEY FUNCTIoN IN PARAMETER

3. PARAMETERS SETTING

iteM
OPeRAtiOn
Enter setting
Capacity
Division
Decimal position
zero-setting
manually &
automatically
(note: if the values
lies out of the allowed
value range, will not
produce effect)
zero-tracking
range and dis-
play speed
(note: if the values
lies out of the allowed
value range, will not
produce effect)
Stable effect
(note: if the values
lies out of the allowed
value range, will not
produce effect)
Unit
Turn off method
38
KEY FUNCTION
→ Shift (choosen digit glitter)
↑ Parameter setting
Confirm
DiSPLAY
F1 & F2
USER'S GUIDE | WEIGHING HOOK | STA
SETTING/CALIBRATIoN
Setting RAnge & exPLAin
Press together, 2 seconds.
Press
Enter parameters setting.
Display : 0.05 / 0.1/ 0.2 / 0.3 / 0.5 / 1 / 2 / 3 / 5 / 10 / 15 / 20 / 30 / 50
/ 75 circularly.
e.g. choose capacity 5000 kg
Display 01/02/05 circularly
e.g. choose 2 kg as division
0=no/ 1=X.X / 2=X.XX / 3=X.XXX
e.g. sin posición decimal
A**: manual zero range, B **: automatical zero range. 0-4,
0=0% FS | 1=2%FS | 2=4%FS | 3=20%FS | 4=100%FS
Parameter set in factory, 4%F.S.
C**: zero-tracking, 0=0d, 1=0.5d, 2=1d, 3=1.5d, 4=2d, 5=2.5d
D**: display speed, 0=slow, 1=average, 2=fast.
Parameter set in factory.
0=minimum, 1=average, 2=maximum
Parameter set in factory.
0=kg, 1=lb
Parameter set in factory.
0=turn off manually / 1=stable, after 15 minutes, scale display
, / 2= stable, after 15 minuts, scale display
after 60 minuts, turn off automatically.
Parameter set in factory.
Parameter setting finished.
key to input parameter setting password.
EN
,