Installation Instructions - De Dietrich DTE1058X Modo De Empleo

EN

1 / INSTALLATION INSTRUCTIONS

• It is necessary to provide a bipolar cut-off device in the power
supply circuit, where the opening of the contacts is more than 3
mm.
• The plug must be accessible after installation.
• If the supply lead is damaged, it must be replaced by an
equivalent lead (H05RNF 3x1mm²) available from the after-sales
department.
• A 16-ampere fuse is necessary
• Your fryer uses 2,200 watts. It is therefore necessary that your
supply can provide this power without danger. IT IS VITAL that
your fryer be connected to earth.
IT IS ABSOLUTELY IMPERATIVE TO LEAVE A SPACE OF AT
LEAST 5 CM BETWEEN THE BOTTOM OF THE FRYER AND
THE FIRST SHELF OF THE KITCHEN UNIT
WARNING : If the fryer malfunctions in any way, unplug the
appliance or remove the fuse corresponding to the sector where the
fryer is hooked up.
- 15 -