Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
SPEED OF THE AD CONVERTER
SPEED 1
standard speed 15Hz.
SPEED 2
high speed 30Hz.
SPEED 3
low speed 7.5Hz
*This function stays blocked when UF-5 is in mode HOLD 1.
*The value of factory is 1
DISPLAY
LF4
•Press the key
again automatically.
SPEED 1
•Use the key
LF 4
•Use the keys
LF 5
BLIND
display
ZP 0
LF 5
ZP 1
ZP 2
ZP 3
ZP 4
ZP 5
*This function is going to be blocked when UF-5 is in mode HOLD 1
*The value of factory is ZP 0
display
LF 5
• Press the key
automatically.
ZP 0
• Use the key
ESC
LF 5
• Use the keys
key
APPROVAL CONFIRMITY
DISPLAY
nonE
LF 6
DON'T MODIFY, IN NO WAY, THIS PARAMETER. IT MUST ALWAYS BE CON-
FIGURED AT nonE.
!
The change of this parameter implies the blocking of some functionalities.
LF 4
DESCRIPTION AND SEQUENCE OF USE
to start or the key
and then the key
to exit from the configuration and go back to the menu LF4)
,
and then
to exit from the menu and the scale will start again automatically.
DESCRIPTION AND SEQUENCE OF USE
OFF
One division will not show being at zero
Two division will not show being at zero
Three divisions will not show being at zero
Four divisions will not show being at zero
Five divisions will not show being at zero
DESCRIPTION AND SEQUENCE OF USE
to start or the key
and the key
to exit from the configuration and go back to the menu LF4)
,
and then the key
to exit from the menu and the scale is going to start automatically.
LF 6
DESCRIPTION AND SEQUENCE OF USE
Version not approved
to exit from the menu and the scale is going to begin
to select the speed of the AD converter ( press the key
To continue with the other adjustment and press the key
to exit from the menu and the scale will start again
to select how many divisions will show when in zero ( press
to continue with other adjustment or press the
USER'S MANUAL BR15
EN
49
Publicidad
Tabla de contenido
