Calibration Settings; Adjustments In Calibration; Technical Parameters - Giropes Baxtran TC15 Manual Del Usaurio

9. CALIBRATION seTTINgs

1. When the user is in the normal mode of weighing, he must press the
on the display.
2. Press the or
* ECF-1 CALIBrATION OF ZErO + wEIGhT
Press the key
Press the key
Press the key Numerical keyboards to introduce the value of the weight of calibration.
Place the weight of calibration on the platform and press the key
steady.
* ECF-2 CALIBrATION OF ZErO
Press the key
Press the key
* ECF-3 CALIBrATION OF wEIGhT (SPAN)
Press the Key
Press the Numerical keyboards, to modify the value of the weight of calibration.
Place the weight of calibration on the platform and press the key
stable..

10. TeChNICAL PARAMeTeRs

DO NOt MODIfY tHE tECHNICAL PARAMEtERS If It IS NOt StRICtLY NEEDED. A BAD CONfIgURAtION Of tHIS SECtION CAN
CAUSE A WRONg fUNCtIONINg Of tHE SCALE.
ENTRANCE AND EXIT TECHNICAL PARAmETERS
dISPLAy
P 0000
With the power off, Press hold on
0020
Enter the value 0020 with Numerical keyboards and press
LF1
the display shows [ LF1 ]
LF 2
Press on the key
Press
to choose the desired function:
to access.
to confirm the calibration of 0.
to accesss.
to "0" calibration.
the display will show the value of the weight of calibration.
or , until the display show [ Lf desired]
to acess the Lf desired.
,
and
ECF-1, ECF-2 o ECF-3
to do the calibration once the reading is
to do the calibration once the reading is
dESCrIPTION
until the display shows: P 0000
to access to menu.
USER'S MANUAL TC15
ECF – 1
the message is going to appear
eN
29