Giropes Baxtran TC15 Manual Del Usaurio página 30

CALIBRATION OF THE WEIGHT LF 1
dISPLAy
LF 1
and it must also never be exceeded.
000.000kg
•press the key
menu Lf1)
•Use the Numerical keyboard,
150.00 kg
will be done.
•Place the required weight on the scale as it is indicated in the display.
150.00 kg
•Once everything is steady, press the key
150.00 kg
go back to the menu Lf1).
tHE CALIBRAtION IS gOINg tO fINISH AND tHE SCALE WILL gO BACK tO tHE WEIgHINg MODE AUtOMAtICALLY.
LF 2
CONFIGURATION
use the keys
weight display
000.00 kg
unit weight display
dp0 Kg
pieces display
div 0
30
the calibration can be done with any weight, but the weight ca not be inferior to 1/100 of the maximum capacity
to start the calibration of zero
( press to exit the calibration without to save and go back to the menu Lf1)
and
Enter the maximum capacity_F5 . Use
and lb.
Enter the position of the decimal point. Use the numeric keypad to select calibration weighing unit as needed.
the position of the decimal point can be from 0 to 4.
• Use the keys 1, 2 and 5 to enter the value of the divison.
dESCrIPTION
( press
0 ~ 9,
and then press
to calibrate it
to move between the digits of the displays
to select the calibration of weighing unit. Available units are Kg, g
USER'S MANUAL TC15
to exit the calibration without to save and go back to the
to introduce the weight with which the calibration
( press to exit the calibration without to save and
eN