Medela symphony Instrucciones página 23

If there is an
overflow
Condensation or
Milk in Tubing
No "Let-Down"
or Breast milk
Expression
If you have not resolved the problem with your breast pump or your
have further questions, please contact Medela Customer Service at
1-800-435-8316 or fill out the contact us form at
www.medelabreastfeedingus.com.
Questions? Visit www.medela.com or call us at 1-800-435-8316.
1. Place the pump set into the bottle holder.
2. Turn off the pump and unplug the power cord from the
electrical outlet.
3. Use a damp (not wet) cloth to wipe the pump and membrane
area.
4. If there is milk in the tubing:
Remove tubing, protective membrane and membrane cap
and clean in accordance with Section 7. Shake out any
drops of water from the tubing and hang up the tubing to dry
or let the pump run with tubing attached until dry.
If there is condensation in the tubing:
Let the pump run with tubing attached until dry.
5. When components are completely dry, reassemble breast
pump and accessories set.
• Turn off the pump and unplug from power source.
• Use a damp (not wet) cloth to wipe the pump.
• Refer to cleaning instructions "Tubing Cleaning" Section 7.
• If necessary, clean the pump kit.
• When components are completely dry, reassemble breast
pump and kit.
• Ensure your breast pump kit is assembled correctly and
suction is available.
• Relax and take a 10-15 minute break, if let down is not
achieved after 2 consecutive pumping sessions.
• Consult with a healthcare or lactation professional if
expression does not occur.
23