Publicidad
Idiomas disponibles
Idiomas disponibles
Caution: Use Dexron® HP transmission fluid only. Failure to use the proper fluid may result in transmission internal damage.
Caution: Check the transmission fluid level immediately after adding fluid and before vehicle operation. Do not overfill the
transmission. An overfilled transmission may result in foaming or fluid to be expelled out the vent tube when the vehicle is
operated. Overfilling will result in possible damage to the transmission.
Check the transmission fluid level, refer to Transmission Fluid Level and Condition Check.
Fill Tube Plug Method
Caution: Use Dexron® HP transmission fluid only. Failure to use the proper fluid may result in transmission internal damage.
1. Based on accessibility, transmission fluid may be added through the fluid fill tube plug assembly (1) hole or through the oil
level check plug (2) hole in the bottom of the transmission fluid pan.
Caution: Before removing the transmission fluid fill tube plug assembly, thoroughly clean around the plug to prevent dirt or
contaminants from entering the transmission during plug removal. Use compressed air to dislodge any caked dirt that may be
stuck on and around the plug area. Use a mirror to confirm the area is free of dirt before removing the plug. Failure to clean
around the plug may result in transmission contamination.
2. Clean around the fluid fill tube plug (1).
Note: It may be necessary to use a long pair of 90 degree needle nose pliers to lift the plunger and remove the plug assembly.
Supermatic Transmission Controller Kit
TITLE
19371499
IR
AP1
PART NO.
3
30
SHEET
OF
Publicidad
