DRAGON WINCH MAVERICK DWM 13000 HD Manual Del Usuario página 40

Ocultar thumbs Ver también para MAVERICK DWM 13000 HD:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 160
4.
Connect thin black wire (a')
(a) on the underside of the motor.
5. Connect long red power supply wire (B') to the po-
sitive (+)
terminal of the battery through the high current
switch, e. g. "disconnecting switch."
6. Connect long black wire (F) (1.8 m) to the bottom
terminal (a) on the motor, and the other end of the wire
(-)
to the negative
b. coNNectioN For MoDeLs:
Connection diagram - see section B at the end of the ma-
nual.
1. Wired remote control and wireless remote control
system are properly connected and do not require user in-
tervention.
2. The set includes 2 electrical wires
B)
to connect the winch to the vehicle's electrical sy-
stem.
a
3. Connect
red wire (fixed on one end in the relay
box) to the positive (+) terminal of the battery through the
high current switch, e. g. "disconnecting switch."
4. Connect one end of the B black wire (supplied sepa-
rately with the winch set) to the terminal located in the
lower part of the winch motor and the other end to the
negative (-) terminal of the battery.
0
to the bottom terminal
terminal of the battery.
DWM  000 HDi
(red A and black
c. coNNectioN For MoDeLs:
DWM 0000 HD, DWM 000 HD En, DWM 000 HD,
DWM 000 HD En,
DWt 000 HD, DWt 000 HD,
DWt 00 HD, DWt 000 HD, DWt 0000 HD,
DWH 000 HD, DWH 0000 HD,
DWH 000 HD, DWH 000 HDV,
DWH 000 HD
Connection diagram - see section C at the end of the ma-
nual.
1. Wired remote control and wireless remote control
system are properly connected and do not require user in-
tervention.
2. The set includes 2 electrical wires
B)
to connect the winch to the vehicle's electrical sy-
stem.
3. Connect a red wire (fixed on one end in the relay
box) to the positive (+) terminal of the battery through the
high current switch, e.g. "disconnecting switch."
4. Connect one end of the B black wire (supplied sepa-
rately with the winch set) to the terminal located in the
lower part of the winch motor and the other end to the
negative (-) terminal of the battery.
5.
Connect the thin black wire c
ted in the lower part of the winch motor.
www.dragonwinch.com
(red A and black
to the terminal loca-

Publicidad

Tabla de contenido
loading

Tabla de contenido