DRAGON WINCH MAVERICK DWM 13000 HD Manual Del Usuario página 41

D. coNNectioN For MoDeLs:
DWts 000 HD
Connection diagram - see section D at the end of the ma-
nual.
1. Use a red wire to connect the bolt placed on the
plastic housing of the winch relays with a positive (+)
minal of the battery through the high current switch, e.g.
"disconnecting switch."
2. Connect the black wire
the lower part of the motor with a negative
the battery.
e. coNNectioN For MoDeLs:
DWH 00 HD,
DWH 000 HD,
DWH 00 HD,
DWH 00 HD,
DWH 00 HDL
Connection diagram - see section E at the end of the ma-
nual.
The set includes two pairs of electrical wires (2x red
1.
and 2x black).
Use the first pair of the wires (red a and black b)
2.
connect the relay to the winch motor as follows:
ter-
B
to the earth bolt located in
(-)
terminal of
to
www.dragonwinch.com
a. Connect one end of the red power wire a
current screw marked with a plus sign "+'' (or a red washer).
Connect the other end to relay pin marked with c.
b. Connect one end of the black power wire b to the
motor current bolt marked with a minus sign "-'' (or white
washer). Connect the other end to relay pin marked with D.
3. Use the second pair of power wires (red c and black
d) to connect the relay with the battery as follows:
a. Bolt one end of the red wire c to the relay pin mar-
ked with a. Connect the other end to the positive
terminal of the battery through the high current switch,
e.g. "disconnecting switch."
b. Connect one end of the power supply wire d
pin marked with B. Connect the other end to the negative
"-"
battery terminal.
4. Bolt the black thin ground wire E to relay pin marked
with B.
5. Connect the wired remote as follows:
a. Connect the red F wire to relay pin marked with a.
b. Connect the black g wire with the green relay con-
trol wire H.
c. Connect the blue wire
wire j.
connecting radio wireless remote control
Connect the wireless control as follows:
red k wire to relay pin marked with a.
a. Connect the
black L to relay pin marked with B.
b. Bolt the
to the motor
"+"
to relay
i to the black relay control
gb