Baume & Mercier Clifton 65717 Manual Del Usuario página 19

This operation may be repeated as often as desired to
measure successive times.
5. Press the P2 push-button to reset the chronograph to
zero.
CHRONOGRAPH: ADDITIONAL FUNCTION
"SPLIT-SECONDS"
27
To measure intermediate time periods with a split-seconds
hand.
1. Press the P1 push-button to start the chronograph.
2. Press the P2 push-button to read the intermediate time.
3. Press the P2 push-button to reset and read the time
elapsed.
Operations 2 and 3 may be repeated as often as desired to
measure any number of intermediate times.
4. Press the P1 push-button to stop the chronograph and
read the final time.
5. Press the P2 push-button to reset the chronograph
to zero.
CHRONOGRAPH: INITIALIZING
THE COUNTERS
27
If the counters are not correctly reset to zero, kindly proceed
in the following order:
1. Pull the crown out to Position 2.
2. Press push-button P2 to reset the minutes counter (G)
to zero.
3. Pull the crown out to Position 3.
4. Press push-button P1 to reset the
chronograph seconds counter (F) to zero.
5. Press push-button P2 to reset the tenth of a second
counter (J) to zero.
6. Press the crown back into Position 1.
| 15