General Diagram - Crison MultiMeter 44 Manual Del Usuario

Operation
Figure 8 Keypad
1
2
3
4
UP key
1
ESC key
2
LEFT key
3
DOWN key
4
4.3

General diagram

20
The instrument functioning by blocks is presented. The target is to orient rapidly the user
about the possibilities of the instrument and the way to accede to them.
1. When power-up the instrument goes to measuring.
2. Access code = 100. The protection code limits the access to calibration or
programming or quit the measuring modes by non-authorised personnel.
Note: If the persist time at this display is more than 15 s, the instruments goes automatically to
measure.
3. Calibration access. See information per the specific channels.
4. Data Logger, see section 4.15, page
5. System. Instrument configuration, see
Note: The instrument has security system ensuring the continuous measurement. If stay in one of
the above displays for more than 15 s without touching any key, the instrument automatically goes to
measure.
MultiMeter 44
OK key
5
LARGE DISPLAY key
6
RIGHT key
7
53.
4.4 Instrument configuration, page 21
5
6
7