Publicidad
Idiomas disponibles
Idiomas disponibles
9 Use the name suggested for your printer and select Yes to designate it as the default
printer; click Next.
10 Select Yes to print a test page and click FINISH.
11 To uninstall the old manufacturer's printer drivers, right mouse click on the old
printer's icon and select Delete.
12 Choose Yes.
13 Restart Windows 95.
Solution #2 (HP 820c Series ONLY)
Solution #2 (HP 820c Series ONLY)
Solution #2 (HP 820c Series ONLY)
Solution #2 (HP 820c Series ONLY)
Solution #2 (HP 820c Series ONLY)
Change Printer Properties
1
Click the Start button and select Run.
2
Type: c:\windows\system\hpfcfg04.exe and select OK.
3
Select Continue.
4
In the available options listing, deselect the check box next to Bidirectional
Communication.
5
Select Restart Windows.
Solution #3 (HP LaserJet 5L ONLY)
Solution #3 (HP LaserJet 5L ONLY)
Solution #3 (HP LaserJet 5L ONLY)
Solution #3 (HP LaserJet 5L ONLY)
Solution #3 (HP LaserJet 5L ONLY)
Uninstall And Reinstall Printer Software Using the PCL Driver
1
Shut down your system and turn off power.
2
Disconnect your printer from the Ditto drive.
3
Turn on your computer and let Windows 95 load.
4
Click the Start button, select Programs, then HP LaserJet 5L and Uninstall.
5
With the printer disconnected, reinstall your printer software and select Install the
PCL driver alternative.
6
Do not Restart Windows.
7
Shut down your system and turn off power.
8
Reconnect printer to Ditto drive.
9
Turn on your computer and let Windows 95 start.
NOTE: Some parallel ports are set to ECP mode. If so, setting the port to bidirectional or
EPP mode may also be necessary. Refer to your computer manual for instructions on how to set
the parallel port mode.
12
Publicidad
