Tabla de contenido

Publicidad

THE BALMORAL
Thank you for choosing the Royal Outdoor Products
Storage Building. Please read this Owner's Manual com-
pletely before assembling your building. Retain manual
and your dated sales slip for future reference and warranty
claims.
Assembly Safety Information
As with any construction project, use common sense
when assembling your building. Royal Outdoor
Products cannot be responsible for any damages or
injuries resulting from the incorrect use of any tools,
equipment or the mishandling of any of the building
components.
• Use proper lifting procedures when handling the
packages.
• Take care when handling the individual components
and wear gloves to avoid cuts or scrapes.
• Follow proper operating procedures for any tools,
ladders, etc. used when assembling the building.
• Protect your eyes. Always wear safety glasses when
assembling building and when using power tools
and hammers.
• Do not assemble building during high winds.
• Do not assemble building if parts are missing. A
partially assembled building may be seriously
damaged by high winds.
• This building must be anchored to the foundation
to prevent wind damage. See pages 4 and 5 for how
to anchor. Screws for anchoring are not included.
THIS IS A MAINTENANCE FREE PRODUCT MADE OF
WEATHERABLE VINYL AND AS SUCH DOES NOT NEED
.
TO BE PAINTED
PAINTING OF THE PRODUCT OTHER
THAN THE DOORS WILL VOID THE WARRANTY
ATTENTION: Before you assemble the building:
The 26 gauge galvanized steel doors are primed and
ready to be painted (paint not included).
PLEASE TAKE A COMPLETE INVENTORY OF
ALL PARTS USING THE PARTS LIST AND
PART IDENTIFICATION GUIDE PROVIDED
ON PAGES 1,2 AND 3. DO NOT ATTEMPT TO
ASSEMBLE BUILDING IF PARTS ARE
MISSING OR DAMAGED.
THE ENTIRE DOOR INCLUDING ALL WOOD
MUST BE PAINTED WITHIN THE FIRST 30
DAYS OF INSTALLATION WITH A HIGH
QUALITY EXTERIOR TRIM PAINT.
other recommended supplies not included).
For assistance or replacement parts call:
1-800-949-7410
©2001 ROYAL OUTDOOR PRODUCTS, INC.
100-B Royal Group Crescent Woodbridge Ontario, Canada L4H 1X9

PARTS LIST:

Right Door Jamb Groove Panel 6' 2 7/8" (1.90m)
Left Door Jamb Groove Panel 6' 2 7/8" (1.90m)
Front/Back Wall Joiner Panels 6' (1.83m)
Back Wall Groove Panels 6' 2 7/8" (1.90m)
Back Wall Joiner Panels 6' 5 1/2" (1.97m)
Back Wall Groove Panels 6' 8" (2.03m)
Back Wall Joiner Panels 6' 8 7/8" (2.06m)
Side Wall Groove Panels 5' 8 15/16" (1.75m)
Side Wall Joiner Panels 5' 8 15/16" (1.75m)
Roof Joiner Panels 4' 2 1/2" (1.28m)
Roof Groove Panel 4' 2 1/2" (1.28m)
Corner Posts
Ridge Beam Sections
Header Assembly
Roof Fascia Caps
Right Door
Left Door
Door Sweeps
Astrigal
Side Base Channel / Right Rear Base Channel
Side Base Channe / Left Rear Base Channel
Right Front Base Channel
Left Front Base Channel
Door Lintel
Ridge Beam Steel Support Beams 5' 7 3/8" (1.71m)
Fascia Gable Right Front and Left Rear
Fascia Gable Left Front and Right Rear
.
Slope Wall Cap
Slope Wall Cap
Accessory Bag:
Ridge Beam Steel Support Beams 5 7/8" (15.0cm)
Ridge Beam End Caps
Ridge Beam Extension Cap Cover
Roof Fascia Cap Covers
Screws #10 x 3/4" (1.90cm) 30 extra included
Door Pins
Door Handles
Door Handle Screws #9 x 1" (2.54cm) Flat Quad
Hinge Screws #9 x 1" (2.54cm) Flat Quad
Slide Lock
Hinges
Vents
(Paint and
Ridge Beam Steel Insert Beam Bolt Set (Bolt, Washer, Nut)
NOTE: PARTS ARE PACKAGED WITHIN OTHER
PARTS. PLEASE CHECK PACKAGE CAREFULLY.
1
Part No. Qty.
DJ1
DJ2
JT2
PT2
JT3
PT3
JT4
PT1
JT1
JW1
PW1
CN1
RB1
HD1
FC1
DR1
DL1
AL3
AL4
AL5
AL6
AL7
RS1
FG1
FG2
SC1
SC2
RS2
1extra set included
1
1
4
2
2
2
1
8
10
10
8
4
2
1
4
1
1
2
1
3
3
1
1
1
2
2
2
2
2
2
2
1
2
200
4
2
8
16
1
4
4
8

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

The balmoral s808

Tabla de contenido