Surface-Mounting The Beacon (154Xst-S); Figure 2 Surface-Mounted Beacon - Federal Signal 154XST Serie Instrucciones De Instalación Y Mantenimiento

Installation and Maintenance Instructions

Surface-Mounting the Beacon (154XST-S)

To surface mount the beacon:
1. Use the mounting base as a template to mark the location of
the two mounting holes.
2.
Drill a 9/32 inch (7.143 mm) hole at each mark.
3.
Secure the beacon to the mounting surface with installer
supplied hardware.
INSTALLER-SUPPLIED
MOUNTING HARDWARE
DRILL TWO 9/32 in
(7.143 mm) HOLES
MOUNTING SURFACE
10

Figure 2 Surface-mounted beacon

154XST-S LIGHT
ASSEMBLY
Models 154XST and 154XST-S
290A6909