Description Of Symbols; General Safety - Silverline 103597 Traducción Del Manual Original

Soldador de arco inverter 200 a, mma
Ocultar thumbs Ver también para 103597:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 22
GB
Introduction
Thank you for purchasing this Silverline tool . This manual contains information necessary
for safe and effective operation of this product. This product has unique features and, even if
you are familiar with similar products, it is necessary to read this manual carefully to ensure
you fully understand the instructions . Ensure all users of the tool read and fully understand
this manual .

Description of Symbols

The rating plate on your tool may show symbols . These represent important information about the
product or instructions on its use .
Wear hearing protection .
Wear eye protection .
Wear breathing protection .
Wear head protection .
Wear hand protection .
Read instruction manual .
DO NOT use in rain or damp environments!
Risk of electrocution!
Danger of toxic welding fumes
Danger of ultraviolet radiation
Danger hot Surfaces
Class I construction (protective earth)
Caution!
Danger of Fire
Environmental Protection
Waste electrical products should not be disposed of with household waste . Please
recycle where facilities exist . Check with your local authority or retailer for recycling
advice .
Conforms to relevant legislation and safety standards .
4
Original Instructions
Specification
Input voltage: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V~ 50Hz
Mains connection: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32A
Input current: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230V: 40A (peak), 15 .5A (effective)
Output current range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-200A
Rated duty cycle: . . . . . . . . . . . . . . . . . . . . 15% @ 200A, 60% @ 100A, 100% @ 77 .5A
No load output voltage: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60V
Output voltage: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21V(25A), 28V(200A)
Electrode rod size: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 .6 – 4 .0mm
Insulation class: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H
Ingress protection: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IP21S
Welding thickness range (steel): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 – 10mm
Protection class: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrode cable length: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 .0m
Earth cable length: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 .5m
Power cable length: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 .0m
Dimensions (L x W x H): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 365 x 135 x 240mm
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 .4kg
As part of our ongoing product development, specifications of
Silverline products may alter without notice .

General Safety

WARNING! When using electric power tools, basic safety precautions should always be followed to
reduce the risk of fire, electric shock and personal injury including the following safety information.
Read all these instructions before attempting to operate this product and save these instructions
for future use .
WARNING: This appliance is not intended for use by persons (including children) with reduced,
physical or mental capabilities or lack of experience or knowledge unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety .
Children must be supervised to ensure that they do not play with the appliance .
CAUTION: Use the power tool, accessories and tool bits etc . in accordance with these instructions,
taking into account the working conditions and the work to be performed . Use of the power tool for
operations different from those intended could result in a hazardous situation .
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-
operated (cordless) power tool .
1 Keep work area clear - Cluttered areas and benches invite injuries
2 Consider work area environment
Do not expose tools to rain
Do not use tools in damp or wet locations
Keep work area well lit
Do not use tools in the presence of flammable liquids or gases
3 Guard against electric shock - Avoid body contact with earthed or grounded surfaces (e .g .
pipes, radiators, ranges, refrigerators)
4 Keep other persons away - Do not let persons, especially children, not involved in the work
touch the tool or the extension cord and keep them away from the work area
5 Store idle tools - When not in use, tools should be stored in a dry locked-up place, out of reach
of children
6 Do not force the tool - It will perform the job better and safer at the rate for which it was
intended
7 Use the right tool - Do not force small tools to do the job of a heavy duty tool
Do not use tools for purposes for which they are not intended; for example do not use circular
saws to cut tree limbs or logs
8 Dress appropriately
Do not wear loose clothing or jewellery, which can be caught in moving parts
Suitable safety footwear is recommended when working outdoors .
Wear protective covering to contain long hair
9 Use protective equipment
Use safety glasses
Use face or dust mask if working operations create dust
WARNING: Not using protective equipment or appropriate clothing can cause personal injury or
increase the severity of an injury.
10 Connect dust extraction equipment - If the tool is provided for the connection of dust
extraction and collecting equipment, ensure these are connected and properly used
11 Do not abuse the power cable - Never pull the power cable to disconnect it from the socket .
Keep the power cable away from heat, oil and sharp edges . Damaged or entangled power cables
increase the risk of electric shock

Publicidad

Tabla de contenido
loading

Tabla de contenido