Transport And Storage; Prerequisites For Use - Festo EPCO-16 Instrucciones De Utilizacion

EPCO
Note
The EPCO is non-braking. When the supply voltage is not applied, the piston rod can be
moved freely. Automatic locking of the complete system can be optionally achieved with
a holding brake in the EPCO-...-ST-B.
3

Transport and storage

• Consider the weight of the electric cylinder.
Depending on the version, the EPCO can weigh up to 5 kg.
• The following should be observed with regard to storage:
– Storage times should be kept to a minimum
– Store in cool, dry, well-shaded locations that do not present a risk of corrosion.
4

Prerequisites for use

Warning
Unexpectedly fast-moving masses can harm people or property (risk of crushing).
• Initially, only apply limited power to the drive motor to ensure low speeds and
torques.
Note
Malfunctions will occur if the device is not used correctly.
• It is vital that the stipulations contained in this section are adhered to at all times.
• Take into consideration the legal regulations applicable for the destination, as well as:
– regulations and standards,
– regulations of the testing organizations and insurers,
– national specifications.
• Note the warnings and instructions on the product and in the relevant operating instructions.
• Remove all transport packaging, such as foils, caps and cardboard.
The material used in the packaging is intended for recycling (exception: oil paper = residual
waste).
• Observe the local regulations for environmentally friendly waste management of electronic compon-
ents.
• Take into account the material specifications (
• Use the product in its original state, without any unauthorised product modifications.
• Take into consideration the ambient conditions at the location of use.
Corrosive environments reduce the service life of the product (e.g. ozone).
Festo – EPCO-Z6 – 1207a English
Technical data chapter).
19