Medel PO01 Manual De Instrucciones página 26

Ocultar thumbs Ver también para PO01:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 77
Do not look directly inside the housing during the measurement. The red light and the
invisible infra-red light in the pulse oximeter are harmful to your eyes.
This device is not intended for use by people (including children) with restricted
physical, sensory or mental skills or a lack of experience and/or a lack of knowledge,
unless they are supervised by a person who has responsibility for their safety or they
receive instructions from this person on how to use the device. Children should be
supervised around the device to ensure they do not play with it.
Neither of the displays for the pulse wave and pulse bar allows the strength of the pulse
or circulation to be evaluated at the measurement site. Rather, they are exclusively used
to display the current visual signal variation at the measurement site and do not enable
reliable diagnostics for the pulse.
Non-observance of the following instructions can lead to incorrect or failed measure-
ments.
There must not be any nail varnish, artificial nails or other cosmetics on the finger to
be measured.
Ensure that the finger nail on the finger to be measured is short enough that the
fingertip covers the sensor element in the housing.
Keep your hand, finger and body steady during the measurement.
For people with cardiac arrhythmia, the measurement values of SpO₂ and the heart
rate may be incorrect or the measurement may not be possible at all.
In cases of carbon monoxide poisoning, the pulse oximeter displays a measurement
value that is too high.
To avoid falsifying the measuring result, there should not be any strong light sources
(e.g. fluorescent lamps or direct sunlight) in the immediate vicinity of the pulse oxi-
100006_MEDEL OXYGEN PO01_USER MANUAL_REV.00_19.04.2016.indd 26
26
10/06/2016 11:25:47

Publicidad

Tabla de contenido
loading

Tabla de contenido