NOTE
• Wash gasket in warm, soapy water. Rinse with
clean water, dry thoroughly and place back in
their original position.
• The silicone rubber gasket can be washed in
the top rack of a dishwasher.
• Soak silicone rubber gasket in a mixture
of baking soda and water to help eliminate
odors before cleaning.
• During cleaning of the lid, ensure Safety
Locking Pin (see page 7, letter "U") moves up
and down freely. Wash and clean any oil or
food residue from this area.
• After cooking rice or large meals, some
cooking liquid may pool under lid at the top
of the appliance around the cooking bowl.
This is normal. Use a paper towel or kitchen
cloth to clean after every use. Use a small
brush or cotton swab if necessary.
a) Wash the inside of the lid with a wet,
soapy sponge or cloth. Use a brush to
remove oil residue if necessary. Wipe dry
with a clean, damp cloth.
b) Regularly inspect that the Pressure
Release Valve Cover is clean and free of
liquid/food. Remove Pressure Release
Valve Cover from the lid (by twisting
and lifting up and off the lid) and wipe
over with a soapy cloth and dry clean.
Rinse well and replace by clipping back
in place.
c) The Pressure Safety Valve will need to be
regularly checked and cleaned in order to
avoid any clogging which could result in
blocking the safety valve.
To clean the Pressure Safety Valve, push
valve from inside the lid in and out
with a long thin object (e.g. chopstick,
screwdriver). Wash and clean any oil or
food residue. Ensure the valve moves in
and out smoothly after cleaning.
27