Manual Breast Pump Assembly - Medela Symphony & Lactina Instrucciones De Uso

7. Assembly of the Pump Kit (cont.)
Tip
T
Carry out all the steps with care and
assemble the pump kit correctly for
optimum performance.
Parts Needed:
• Breast shield
• Breast milk bottles/container
• Lid
• Connector
• Yellow valve head
• White membrane
• Piston
• Cylinder
Note
• Use Authentic Medela Spare Parts
only. See page 5 for details.
• Check pump kit components for wear
or damage before use and replace
if necessary.
• All components must be completely
dry before use for proper
performance and to prevent damage
to the pump.
24
7C. Manual Breast Pump Assembly
For manual breast pumping follow the
instructions below.
1
Cylinder
Slide the vacuum regulator ring
onto the cylinder. Push handle end
of piston into the cylinder.
4
Push yellow valve head onto inner
ring of connector bottom.
7
Set vacuum regulator ring to
"MIN".
Piston