Medela Symphony & Lactina Instrucciones De Uso página 29

If there is an overflow
Condensation or Milk
in Tubing
No "Let-Down"
or Breast Milk
Expression
If you have not resolved the problem with your breast pump or you have further
questions, please contact Medela Customer Service at 1-800-435-8316
or fill out the contact form at www.medelabreastfeedingus.com.
Questions? Visit www.medela.com or call us at 1-800-435-8316.
1. Place the pump set into the bottle holder.
2. Turn off the pump and unplug the power cord from the electrical
outlet.
3. Use a damp (not wet) cloth to wipe the pump and membrane area.
4. If there is milk in the tubing:
Remove tubing and clean in accordance with Sections 4 & 6.
If there is condensation in the tubing:
Let the pump run with tubing attached for 1–2 minutes or
until dry.
5. When components are completely dry, reassemble breast pump
and accessories set.
• Turn off the pump and unplug from power source.
• Use a damp (not wet) cloth to wipe the pump.
• Refer to cleaning instructions "Tubing Care" Section 6.
• If necessary, clean the pump kit.
• When components are completely dry, reassemble
breast pump and kit.
• Ensure your breast pump kit is assembled correctly and suction is
available.
• Relax and take a 10-15 minute break if let-down is not achieved.
• Consult with a healthcare or lactation professional if expression does
not occur after 2 consecutive pumping sessions.
29