Medela Symphony & Lactina Instrucciones De Uso página 18

7. Assembly of the Pump Kit (cont.)
9
Open the lid of the breast pump.
 Press the oval button on the
top of the Symphony
the handle.
13
Center breast shields over your
nipples and start pumping.
(Caution: pushing shields too firmly
onto breasts may affect milk flow.)
*Pumping instructions are for Symphony Standard 2-Phase Expression
using the MAINTAIN program of Symphony PLUS
the Symphony Breast Pump Instructions for Use, item # 1907724, for more detailed
pumping instructions.
18
and lift
®
10
Position the membrane cap firmly
on the breast pump membrane
to form a seal. Center the tubing
connector in the recess in the
pump housing.
 Make sure that the membrane
cap engages and lies flush to
the surface.
Note
If single pumping, only seat one
membrane cap.
14
To turn the pump on, press
the power button. You will be
starting in the Stimulation Phase.
After 2 minutes, the pump will
automatically change to the
Expression Phase.*
program card. Please refer to
™
or when
®