Harbor Breeze 00873 Manual De Instrucciones página 5

ASSEMBLY INSTRUCTIONS
7. Align notches on fan motor (B) canopy with raised
areas on inside of trim ring (C). Pop trim ring (C) into
the canopy.
8. Remove and discard preassembled rubber shipping
stabilizer tabs (N) from fan motor (B). Insert blade
(D) into slot on fan motor (B). Secure blade (D) with
enhance plate (E) and three blade screws (BB). Repeat
for remaining blades (D), enhance plates (E) and blade
screws (BB).
Hardware Used
BB Blade Screw x 10
KK
N
9. Loosen two screws from switch housing plate (H).
Remove and save remaining screw.
7
Notch
C
Canopy
Raised
area
8
Slot for
B
blade insert
E
N
BB
E
9
H
Screw
Lowes.com/harborbreeze
8
ASSEMBLY INSTRUCTIONS
10. Insert wires from fan motor (B) through middle hole in
light plate (F). Attach light plate (F) to switch housing
plate (H). Align keyholes then twist to lock. Replace
previously removed screw (Step 9, page 8) and
securely tighten all screws.
B
11. Loosen two preassembled screws from light plate (F).
Remove and save remaining preassembled screw
from light plate (F).
D
12. Connect WHITE wire from light plate (F) to WHITE
light plate (F) to BLACK
and twist to lock. Replace previously removed screw
(Step 11, page 9) and securely tighten all screws.
`
10
B
F
Keyslot hole
11
F
JJ
12
BLUE wire from
F
G
Lowes.com/harborbreeze
9
H
Screw
Screw
D
Screw