Harbor Breeze E-TM52BNK5CS Manual De Instrucciones página 13

FINAL INSTALLATION
4. Remove three screws from outer edge of switch
housing plate (M).
Partially loosen two screws in fitter plate on
underside of motor housing (J) and remove the
other screw. Align slotted holes in switch housing
plate (M) with loosened screws on fitter plate,
allowing male plug from motor housing (J) to come
through hole in switch housing plate (M). Twist
switch housing plate (M) to lock. Re-insert the
screw that was removed and securely tighten all
three screws.
Connect male plug from motor housing (J) to
5.
female plug from light kit fitter (N), matching up
the colors on the male plug with the colors on the
female plug for correct fit. Make sure plugs are
connected completely. Align holes in switch
housing at top of light kit fitter (N) with holes in
switch housing plate (M). Secure light kit fitter (N)
with three screws previously removed. Tighten all
screws securely.
6.
Align dimples on socket cover with grooves in glass
shade (I). Turn glass shade (I) clockwise to secure.
Repeat with the other glass shades (I).
4
J
Fitter
Plate
M
5
M
Switch
Housing
N
6
Socket
Cover
Lowes.com/harborbreeze
13
Male
Plug
J
Male
Plug
Female
Plug
I