Important; Fan Mounting - Harbor Breeze E-TM52BNK5CS Manual De Instrucciones

INITIAL INSTALLATION
Secure mounting bracket (A) to outlet box (not
4.
included) using screws, spring washers, and flat
washers provided with the outlet box.
*NOTE: It is very important that you use the
proper hardware when installing the mounting
bracket (A) as this will support the fan.
IMPORTANT: If using the angle mount, make
sure open end of mounting bracket (A) is installed
facing the higher point of the ceiling.
Remove motor screws (E) and lock washers (F)
5.
from underside of motor housing (J). Save motor
screws (E) and lock washers (F) for blade arm (C)
attachment later on.

FAN MOUNTING

1.
Remove pin (P) and clip (Q) from motor housing
yoke at top of motor housing (J) and partially loosen
preassembled set screws.
4
A
5
1
Q
J
Lowes.com/harborbreeze
7
E
F
J
Set
Screw
P