Technical Data; Usage - Vinten Osprey light Manual Del Usuario

Payload
Column weight
Skid weight
Kick ring weight
Total pedestal weight (without kick ring)
Trim weights (4 x 1.0 kg)
Minimum height
Maximum height
On-shot stroke
Ground clearance
Doorway tracking width
Transit doorway width
Wheel diameter
Steering ring diameter
Maximum working pressure
Minimum working pressure
Relief valve pressure
Internal capacity
Operational temperature
The Osprey Light pedestal is designed for use in television studios and on location to support and balance
a pan and tilt head, camera and ancillary equipment weighing up to 40 kg (88 lb).
This product is intended for use on an unobstructed and reasonably level surface by television camera op-
erators.
WARNING!

Technical data

-20°C / +60°C (-4°F / +140°F)
1. Do NOT attempt to use this product if you do not understand how to
operate it.
2. Do NOT use this product for any other purpose than that specified in the
Usage statement above.
3. Maintenance beyond that detailed in this Operators Guide must be per-
formed only by competent personnel in accordance with the procedures
laid down in the Maintenance Manual.
STUDIO
40 kg (88 lb)
10.45 kg (23 lb)
8.45 kg (18.6 lb)
2.5 kg (5.5 lb)
18.9 kg (41.6 lb)
4.0 kg (8.8 lb)
76.5 cm (30.1 in.)
130.5 cm (51.4 in.)
54 cm (21.3 in.)
10 cm (0.4 in.)
80.6 cm (27.5 in.)
70 cm (27.5 in.)
10 cm (4 in.)
50 cm (19.7 in.)
9.6 bar (139 psi)
2 bar (29 psi)
10 bar (145 psi)
1.9 L (0.50 gal)

Usage

English
40 kg (88 lb)
10.45 kg (23 lb)
8.65 kg (19 lb)
2.5 kg (5.5 lb)
19.1 kg (42 lb)
4.0 kg (8.8 lb)
77.8 cm (30.6 in.)
131.8 cm (51.9 in.)
54 cm (21.3 in.)
2.25 cm (0.9 in.)
80.6 cm (27.5 in.)
70 cm (27.5 in.)
12.5 cm (5 in.)
50 cm (19.7 in.)
9.6 bar (139 psi)
2 bar (29 psi)
10 bar (145 psi)
1.9 L (0.50 gal)
-20°C / +60°C (-4°F / +140°F)
OB
11