Cleaning; Ameda Elite Breast Pump; For At-Home/End-Users; For Hospitals/Rental Stations - Ameda Elite Manual De Instrucciones

Cleaning the Ameda Elite Breast Pump

Troubleshooting

Pump Does Not Turn ON
Low or No Suction
properly assembled.
breast flange.
flange.
adapter port on pump.
valve.
of breast flange.
pumping.
cord from wall outlet.
placing index finger into the
tube, lifting upwards and
turning right to release from
attachment bars.

For At-Home/End-Users

After each pumping, wipe
pump with cloth dampened
with warm, soapy water.

For Hospitals/Rental Stations

Clean between users.
Spray with recommended
disinfectant, such as
TM
CaviCide . Wipe with soft
cloth. Do not use products
containing phenol.
Do not use bleach on pump.
onto attachment bars and
press gently into place with
thumb.

Maintenance

It is recommended the Ameda Elite Breast Pump be
inspected at least once every year to include the following:
damage and ensure pump feet are present.
obstruction.
Quick Functional Check
The following checks/tests should be performed prior to use
by a new user:
Replacing Detachable Power Cord (if applicable)
Ameda supplied 2 conductor cord.

Technical Information

Main voltage
Elite with Detachable Power Cord 100VAC to 240VAC
Elite with Built-In Power Cord 100/120V ~ or 220/240V ~ /AC
Frequency
Power consumption 30 VA
Main fuse T 1.6A
Protection class Class II
Safety level
Drip protection IP 21
Operational conditions
10 - 90% rel. humidity
Transport and
Storage conditions 10 -100% rel. humidity
Weight 6.4 lbs/2.9 kg
Dimensions
22.2cmL x 26.7cmW x 18.4cmH
Vacuum max. [mbar]
Single pumpset 350 ( -10% )
Double pumpset 310 ( -15% )
Variable cycle 30 - 60 / Min
Conforming to
0086
IEC60601-1: 1988 + A1:1991 + A2:1995,
Evenflo Company, Inc.
1801 Commerce Drive
USA
EN
Double isolated
= BF
[mm Hg]
262 ( -10% )
232 ( -15% )
EMERGO EUROPE
Molenstraat 15
2513 BH, The Hague
Phone: +31.70.345.8570
Fax: +31.70.346.7299
7
E N G L I S H