Festo CMMS-ST-C8-7-G2 Manual Del Usario página 23

4 On−the−spot diagnosis
The display and the meaning of the symbols shown are
illustrated in the following table.
Display
P xxx
PH x
E xxy
−xxy−
Festo P.BE−K−CMMS−ST−G2 1008NH English
Meaning
Operation mode Speed adjustment"
The external segments rotate on the
display in this operating mode. The
central bar is also active when the
controller release is active.
The CMMS−ST stepping motor controller
has not yet been configured. Display A"
Operation mode Torque−controlled
operation". Display I"
Operation mode Positioning"
Numbers xxx are displayed in suc
cession and represent the position
record number.
Operation mode Homing"
Number x represents the actual homing
phase.
Error message with index xx" and sub−
index y".
Warning with index xx" and sub−index
y" Warnings are shown at least twice
on the display.
23