Festo CMMS−AS Manual Del Usuario página 30

Preparations for commissioning
1. Connect the motor
2. Connect the CMMS−AS motor controller.
3. Connect the PC.
4. Check readiness to operate.
5. Install the parametrizing software on your PC.
6. Follow the installation instructions for the parame
trizing software.
30
Make sure that the controller enable switch is
switched off.
Switch on the power supplies for all devices. The
READY LED on the front of the device should now
light up.
Enter the data storage device in the disc drive.
If the SETUP program does not start automatically,
start the WINDOWS Explorer.
Select the disc drive in which the parametrizing
software is inserted.
Start the program SETUP.EXE (double−click).
.
Festo P.BE−K−CMMS−AS 0708NH English