Accessories (Optional) - MSA 360S Guia Del Propietario

• Plastic tube out-of-round
• Rubber tube is no longer supple
and elastic
• Impact Cap liner/ring has holes or
blistering
• Missing velcro for earlaps (except
880)
Note: The following impact cap can
only be installed on the helmet models
listed:
M802 — Model 360
10046722 — Model 880
M603 — Models 660, 660C,
660CE, 664, 990, 990E,
HP3, 515, 515E
M604 — Models 1000, 1010,
1044
Leather Helmet Repairs
MSA CairnsHELMETS Leather helmets
can be sent back to the factory for the
following repairs:
• Repaint
• Replace/Add Earlap
• Replace/Add Impact Cap – Only
on helmets made from 1985 to
present
• Replace/Add Front Holder
• Replace/Add Suspension System
• Replace/Add Ratchet – Only on
helmets made from 1985 to pres-
ent
• Replace/Add D-Ring
TAL 4011 (L) Rev. 9 - 10043529
MAINTENANCE
12
• Replace/Add Faceshield/Hardware
• Replace/Add Chinstrap
STORAGE
• NEVER store equipment in or on
the helmet that is not explicitly
authorized by MSA
CairnsHELMETS. Storage of
gloves, wedges, lights and other
equipment could dramatically
change the helmet's protective
capacity.
• Store helmet in a clean, dry area
where it is not exposed to heat,
cold or sunlight which can affect
the helmet's useful service life.
• Do not store the helmet with the
lining ratchet face down on a flat
surface. Storage in this manner
(ratchet fully extended) may cause
the lining band and ratchet band
mechanism to bend or distort. This
may affect comfort and fit.
• Store the helmet with ratchet sus-
pension set to its smallest size
when not in use.

ACCESSORIES (OPTIONAL)

See our catalog or contact your
authorized fire service distributor for
our full line of products.