Tabla de contenido
Publicidad
C3X 1080
App.3 INSTALLATION INSTRUCTIONS (VERTICAL SHIFT)
To install the HT3000 HOST system correctly place the projector so that the projected image completely fills the screen.
Ideally, to avoid image distortion, the projector should be positioned perfectly perpendicular to the projection screen,
as shown in the figure below. The centre of the projection lens should be lined up with the centre of the projection
screen.
Sreen
Lens projection center
Screen
Center= 0
Height
Projection Distance
VERTICAL SHIFT (ASSUMING 0% OFFSET)
0 % O set
Screen
Center= 0
Height
Floor Installation
CAUTION:
The examples shown in the figure give only general indication on the use of the vertical shift. Each projection
lens may require differing vertical shift settings. For more detailed information, see the technical specifications
or contact an authorised SIM2 Multimedia centre.
5
Publicidad
Tabla de contenido
