Care And Cleaning - WeatherTech Easy-On Instrucciones De Uso Y De Instalacion

Installation Steps
NOTE: Actual application may vary slightly from illustrations.
Check position of hood shield. NOTE: Ensure that center flanges where tape will adhere are not in contact with top of grille.
Align front of shield with front edge of hood.
Hood shield
Hood
Grille
9
Press and hold hood shield against the upper surface of hood. Remove remaining tape liner by pulling on the free ends. Apply
pressure to flange to ensure proper adhesion of tape.
10
11
Remove adhesive backing and apply (2) bump
ons to hood surface.
12

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Page 3 of 3
© 2016 by MacNeil IP LLC